honda305 Home honda305 Auctions honda305 Gallery honda305 Forum Electronic Ignition honda305 Forum honda305 Forum honda305 Forum honda305 Racing honda305 Literature

Auctions  Mailing List    Registry   Marketplace

honda305.com Forum - FULL SCREEN

honda305.com Forum

Log In
□ Search
  □ Classified Ads
□ Register
□ FAQ 
  □ Search Ads
□ Profile 
  □ My ads
Vintage Honda Owners,
Restorers, Riders and
Admirers

brass bushing lert or right
Goto page Previous  1, 2
 
Post new topic   Reply to topic    Honda305.com Forum -> Honda Superhawk - CB72 | CB77 | CP77 | CBM72
View previous topic :: View next topic  
Author Message
Tonyshawk
honda305.com Member


Joined: 04 Dec 2018
Posts: 9

PostPosted: Thu Jan 03, 2019 10:20 pm    Post subject: Reply with quote

Thanks for the info Brian The pawl, spring, and spindle pawl all came out of the spindle because of the busted bushing. I took oil pump out and found them in there, blew a hole in my oil screen but luckily no damage to pump. I ordered a mess of odd and end parts off Ebay thank God that there was a bushing in that lot, it shows some wear but its 20 time better that what I had. I'm going to order all new parts for the pawl I'm also getting a used spindle from bobcovintage cycle
Wish me luck I expected some trouble 50yrs old but so far its been a nightmare Froze piston destroyed after a month of pounding trying all different way to get it loose finally comes loose then cracks lower jug coming out. Cylinder with pistons Ebay $120 with s&h getting my heads done now hope they check out ok You have a good evening and I'll keep on keepin on.
Back to top
View user's profile Send private message
LOUD MOUSE
honda305.com Member


Joined: 15 Aug 2005
Posts: 7732
Location: KERRVILLE, TEXAS

PostPosted: Sun Jan 06, 2019 4:11 pm    Post subject: PAWL Reply with quote

When you get the new pawl you will see sharp edges on both sides/ends.
I use my air tool with a sanding disc and round the sharp edges which allows the pawl to rub on the kick spindle bushing and not wear into it. .................lm


Tonyshawk wrote:
Thanks for the info Brian The pawl, spring, and spindle pawl all came out of the spindle because of the busted bushing. I took oil pump out and found them in there, blew a hole in my oil screen but luckily no damage to pump. I ordered a mess of odd and end parts off Ebay thank God that there was a bushing in that lot, it shows some wear but its 20 time better that what I had. I'm going to order all new parts for the pawl I'm also getting a used spindle from bobcovintage cycle
Wish me luck I expected some trouble 50yrs old but so far its been a nightmare Froze piston destroyed after a month of pounding trying all different way to get it loose finally comes loose then cracks lower jug coming out. Cylinder with pistons Ebay $120 with s&h getting my heads done now hope they check out ok You have a good evening and I'll keep on keepin on.
Back to top
View user's profile Send private message Send e-mail AIM Address
Display posts from previous:   
Post new topic   Reply to topic    Honda305.com Forum -> Honda Superhawk - CB72 | CB77 | CP77 | CBM72 All times are GMT - 5 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  

 


 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home