Honda305.com Forum

Conbs: Thank you for sharing the information. I for one would like to see your photos of the switch. I did get the switch to function properly after testing with an ohmmeter in all possible contact positions (8 or 9). Not very difficult after removing and placing on a workbench. My three triangular ...

Very close! The attached photo shows the switch internal circuit ... but I need a photo of the other side of this switch that makes contact to the circuit. The side of the switch I need contains 3 triangle contacts separated approximately 120 degrees apart. Each contact can be inserted in two positi...

I reside in the Houston area ... La Porte, Texas.
Thanks.
BJS

Thank you for the response. I have used both diagrams (the switch matrix and the wiring schematic)to troubleshoot the starter electrical problem to the internals of the switch itself. Now I need a photo or a diagram of the internal contact placement position. I have seen one in the past but cannot f...

Does anyone have a diagram/photo showing the correct contact position inside the combination/ignition switch? I was not getting the battery voltage to the starter (ST) but the ignition (IG) did have the 12 volts in the correct key positions. The switch was previously taken apart but appears to be al...

Your step-by-step procedure accompanied with color photos is the very best explanation and easiest to understand that I have found by far. I am definitely going to clean my CA 72 fuel tank using your instructions!!
Thank you.

I am in the Houston area near Pasadena, any help will be greatly appreciated!!!