honda305 Home honda305 Auctions honda305 Gallery honda305 Forum Electronic Ignition honda305 Forum honda305 Forum honda305 Forum honda305 Racing honda305 Literature

Auctions  Mailing List    Registry   Marketplace

honda305.com Forum - FULL SCREEN

honda305.com Forum

Login
□ Search
  □ CLASSIFIED_ADS
□ FAQ 
  □ SEARCH_ADS
□ 
  □ MY_ADS
Vintage Honda Owners,
Restorers, Riders and
Admirers

Search found 537 matches

by DJM
Thu Feb 11, 2021 7:17 am
Forum: Honda Scrambler - CL72 | CL77
Topic: Engine Removal Tricks??
Replies: 6
Views: 463

Re: Engine Removal Tricks??

When you come to put the engine BACK into the frame don't forget to fit the starter motor blanking plate first. If you try to do it with the engine in place you can't get all the screws back in because they are too close to the frame. Just passing on the info from a friend who had done just that and...
by DJM
Sun Jan 03, 2021 10:52 am
Forum: Honda Dream - CA72 | CA77 | CA78
Topic: Cold starting
Replies: 4
Views: 527

Re: Cold starting

Not sure that the HV was a forerunner to the HA, completely different type of construction. Gold Palladium plugs are noted for their much improved resistance to fouling when compared to 'conventional' plugs. Years ago I heard of a major car manufacturer that was having problems with wear in the inle...
by DJM
Fri Nov 27, 2020 2:10 pm
Forum: Carburation - Fuel
Topic: Fat Right Side
Replies: 8
Views: 886

Re: Fat Right Side

If you're sure the floats are set correctly any chance one has a pin hole or two in it? Still perhaps worth trying to swap floats and float valves left to right to see it changes anything. Just lately I've also heard of a few cases of condenser failure which would have been very unusual only a few y...
by DJM
Thu Nov 26, 2020 3:49 pm
Forum: Carburation - Fuel
Topic: Fat Right Side
Replies: 8
Views: 886

Re: Fat Right Side

If you're sure that the choke slides are synchronised properly and that both chokes are fully open when the choke is OFF then almost certainly the float level needs to be adjusted. It sounds as if the fuel level is too high on right hand carb. Fuel level in the carbs affects all throttle openings. M...
by DJM
Sun Nov 22, 2020 10:31 am
Forum: Carburation - Fuel
Topic: CB77 float needle sets
Replies: 0
Views: 390

CB77 float needle sets

I'm putting together a set of CB77 carbs from spare parts and have most of the bits I need. I have a lot of float needle seats, the hex. brass bit that screws into the main carb. casting. Some are unmarked, some are marked 2 and some marked 2.5. I think the 2.5s are correct for the CB77 carb, anyone...
by DJM
Tue Nov 03, 2020 7:18 pm
Forum: Honda: Early Models
Topic: Jc58
Replies: 2
Views: 315

Re: Jc58

Good luck with that!
by DJM
Sun Oct 18, 2020 2:29 pm
Forum: Motors - 247cc | 305cc | 337cc | 350cc
Topic: ca77 305 oil around plug hole
Replies: 2
Views: 462

Re: ca77 305 oil around plug hole

This is a well documented problem with all of these engines, C, CA, CB and CL, not all engines suffer from the problem but quite a few of them do. American Honda even issues a Service Bulletin about the problem so it was accepted as an issue by them. I suggest you look back through old postings for ...
cron

 


 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home