Search found 359 matches
Re: How screwed am I?I did a similar method on an old Norton, I bored inside the rings and then was able to break the piston away without damaging the bore.
Re: C72 from FranceThey should improve the handling, I always felt my CA77 was really nice to ride until you started to corner a bit faster or ride a bumpy road, then it got a bit too exciting.
Re: C72 from FranceThe saddles look great, nice job
Re: How screwed am I?I don’t wish to appear rude but…… why do people take either the carbs off or the plugs out before storing the bike in a river for a few years. Always seems such a shame that what could have been rebuildable becomes a salvage operation!
Re: C72 from FranceHi Michael, I did post the completed frame repair a while ago but for those new to site I’ll show the photos again. Being double skinned meant I had to do it in stages to avoid distortion. Once near completion I used a laser to check for alignment and tweaked the frame before finally finishing the w...
Re: 305 VS 150 DREAMAlmost nothing is the same, even the drive is on the opposite side, the headlight is about 1/4” smaller. 305 on the left and the c95 on the right.
Re: C72 from FranceThe rust on the frame is a real pain, I would get it shot blasted to show any other areas of concern, my C95 was really bad, right on the verge of not being repairable.
|