Search found 101 matches
You have to have a key to remove the steering lock! I posted a message previously with pics on this subject. I was mistaken on one point but the pics were correct. Good locksmith could pick it. Look at the numbers on the loclset and look at some of the previous requests for keys. Several vendors and...
There are small springs that go under the plungers. Very fine wire! They seem to disappear, kind of like one sock of a pair in the dryer. If you have the starter clutch apart now, replace the plungers,springs and rollers. Check the flat head screws that hold the backplate to the assembly, they crack...
Take the four bolts holding the tensioner to the cylinders out. The whole mechanism will come out with no parts dropping in. The roller and lever will pivot down as you remove it, but it is attached to the alum. casting. Check the condition of the rubber roller. Chances are its not pliable anymore a...
Most problems are best solved by the process of elimination. Since your battery spins the starter and runs the bike your battery and ground cable are good. In past threads here you may have read that the starter solenoid operates by grounding the start button. Look at the wiring diagram posted here ...
StarterGun,
I have a tested starter from a parted out 1965 CA77. I f you're interested PM me.
|