honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Search found 229 matches

by Phil-UK
Mon Apr 15, 2019 9:32 am
Forum: Honda: Other Twins
Topic: What are the symptoms of the cam picking up in the head ?
Replies: 4
Views: 5486

Hi Graham My thinking was that if the clearance between the cam and carriers was too big the oil might have been escaping and over filling the cambox and then crankcase pressure could cause it to blow. Probably grasping at straws and I agree it will only show up when stripped; I know cam seizures we...
by Phil-UK
Mon Apr 15, 2019 2:03 am
Forum: Honda: Other Twins
Topic: What are the symptoms of the cam picking up in the head ?
Replies: 4
Views: 5486

Forgot to make clear, oil level had been on full when left home.
by Phil-UK
Mon Apr 15, 2019 2:00 am
Forum: Honda: Other Twins
Topic: What are the symptoms of the cam picking up in the head ?
Replies: 4
Views: 5486

What are the symptoms of the cam picking up in the head ?

Took my CB350 out for the first time this year and after @4 miles at about 50mph it tightened up and felt like it might have seized. It restarted but was blowing a LOT of smoke out of the cambox breather. Limped it back home and changed bikes and later ( when cold ) put a compression tester on and b...
by Phil-UK
Sun Sep 23, 2018 4:01 am
Forum: Carburation - Fuel
Topic: Anyone used Permatex or J-B Weld Tankweld ?
Replies: 10
Views: 6356

Update - Had a reply back from Permatex in North Carolina :- Hi Phil. I do not recommend our kit form for this repair. It could dissolve over time and uses fiberglass strands as a backing. Our “putty” style is now safe on up to 10% ethanol gas. Part number for this is 84334. Graham - I had seen the ...
by Phil-UK
Mon Sep 17, 2018 12:30 pm
Forum: Carburation - Fuel
Topic: Anyone used Permatex or J-B Weld Tankweld ?
Replies: 10
Views: 6356

I had tried emailing JB Weld themselves and have just had this response :

Philip,

Ethanol eventually eats away at all our products.

J-B Weld Support


So back to the drawing board.


Thanks again for the replies,


Phil
by Phil-UK
Mon Sep 17, 2018 7:38 am
Forum: Carburation - Fuel
Topic: Anyone used Permatex or J-B Weld Tankweld ?
Replies: 10
Views: 6356

Thanks for the advice, will go with the JB Weld ( ideally the Tankweld or maybe the Steelstick if easier to get ). Will put a little petrol in once done and see if anything comes out over a week with the tank on the bench.

Phil
by Phil-UK
Fri Sep 14, 2018 2:38 am
Forum: Carburation - Fuel
Topic: Anyone used Permatex or J-B Weld Tankweld ?
Replies: 10
Views: 6356

Anyone used Permatex or J-B Weld Tankweld ?

Hi Has anyone on the Forum experience of using Permatex Fuel Tank Repair Kit or J-B Weld Tankweld Repair Kit with modern fuel containing ethanol ? I have found a pinhole in a steel tank that was lined ( POR-15 ) and painted a year or so ago. Metal around it seems OK and ideally it should be welded o...




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home