Honda305.com Forum

G, I'm not sure how we will market the fenders (mud guards) . We're still working out the tooling, finishes and what not. I'll probably sell the fender, without the stay , trimmed but undrilled. Our fender will come with all of the stays. We rolled a couple from 22 ga steel this morning with the edg...

Thanks for the comments. Today I got the wire loop jig made and welded a pair to the first brace. We powder coated with a chrome powder. When it came out of the oven it was absolutely gorgeous with a mirror finish However this product is not durable so you have to clear coat over it for protection. ...

Progress for today.

Roll dies re-cut. Rolled 1 fender from 20 ga steel.

Rough trim, no holes, no wire edge.

More progress with the 8 hole stay today. Got the dies finished to form the clips, and flatten the tubing at the rear after its formed. This one is welded up but still need the joggles in the tube at the sides, the cable loops, holes for the bolts at the top, and the reinforcing washers spot welded ...

OK, after 4 years of procrastinating, I've taken up the Scrambler fender project again. I got dealt a couple of little delays with work, family, PC, etc. I didn't realize I had let it set so long. The laser cut blanks for the 8 hole bracket have been sitting on the shelf for over 2 years and the too...

I need a set of fair to decent Air Cleaner Cases (side covers) P/N 17331-268-020a and 17231-268-020a for CB77 Superhawk. Seems that during the 35 years that my bike was away from home, the side covers, air cleaners, tubes and brackets, became misplaced. I have rounded up from my stash everything exc...

G I'm standing at the bike right now and a magnet is sticking to the covers. Must be steel. Dad bought this one for me right around my 16th birthday. I'm 59 and he's 79 so we were both kids at the time. I think Ed stated that the center stand ,the rear tank mount, and the tail light bracket should b...