Honda305.com Forum

It is possible that someone had rigged up an external oil cooler at some point.

I have recently painted a set of CB77 fenders with the Honda aerosol Cloud Silver, and it is a good match for the original color. I got it from ebay.

You can't remove the bolt from the camshaft with the shaft in place. You can loosen the nut on the end of the bolt, then give it a little tap on the end with a small hammer to loosen the bolt within the shaft half. This will make it easier to remove/install.

You should have room to get a dremel with a small cutoff wheel into the space, then cut the side plates on one of the links. You'll have to remove a link anyway if you plan to reuse the cam chain with a master link. If you do this, you'll need to pack the area with rags to keep the swarf out of the ...

I have to say that you have the most interesting title to your post. Your bike may be a bit sluggish running on percocet. Does the bike run? If you have flow from each outlet, maybe it will pull fuel from both when the engine turns over. If you try clear fuel lines, you can tell if you are flowing t...

The shaft with the pin will/should pull out, which may allow you to remove the spinner cap. However, I have usually found that the cap is stuck into the spinner, requiring me to remove the whole spinner. As you have found, the drive chain on the back of the spinner makes it hard to remove, especiall...

This guy on ebay has one. I've bought keys from him before with no problems. His prices are good.
https://www.ebay.com/itm/PRECUT-HONDA-M ... Bg&vxp=mtr