Search found 7673 matches
Re: CL77 Frame Number to YearIf you have a OVAL tail light I'd say 1967. ..............lm
Re: Stator on 66' CL77The winding is a coil. In the middle is a steel part with tabs on the inside and outside of the steel. ..............lm
Re: Shocking discussionNONE, NONE of the early shocks were duel damping.
Rebound only. Test any and you will find they compress easily and HARD TO PULL!. .............lm
Re: kick start shaft seal removalRemove the K/S cover use a punch/something you can drive into the seal then pry the seal out.
Angle the outer edge of the seal hole so seal will not roll the rubber of the seal. (NO OIL ON EDGE OF THE SEAL). ................lm
Re: CL77 DampersDJM is correct.
The plastic cover has a larger diameter and the left side gets melted by the pipe. ......................lm
Re: Clutch friction plates - sourcesHONDA changed the clutch design from first year to last 9 times.
The last 2 years 1966/67 the CUSH design was used and is yhe best design. Had 5 Aluminum plates ratheer than plastic. ...........................lm
Re: ca77 1966 exhaust collar install questionQuicker to talk than type.
Call me. .............lm
|