honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Wrong fuel cap?

Fuel System: Gas (Petrol) tanks, Carburators
Post Reply
philrock
honda305.com Member
Posts: 60
Joined: Sun Nov 23, 2014 1:25 pm
Location: San Luis Obispo, CA

Wrong fuel cap?

Post by philrock » Fri Oct 11, 2019 10:25 am

The fuel cap on my '66 CB77 sits down very close to the tank - too close for me to remove it with just my hands after it has sat for a few days. I'm wondering if maybe I have the wrong cap, but it may be possible the tank has just gotten a bit pushed in around the inlet. Please see photos.

Any suggestions would be greatly appreciated.


Image
Image
Image

AlanW
honda305.com Member
Posts: 167
Joined: Tue Jul 01, 2014 6:33 am
Location: Wirral UK.

Post by AlanW » Sat Oct 12, 2019 2:35 am

Hi,
A smear of grease on the seal works a treat, try it.
Al.

pemdoc65
honda305.com Member
Posts: 81
Joined: Wed Apr 29, 2015 6:28 pm
Location: Louisville, Kentucky

Post by pemdoc65 » Tue Oct 15, 2019 8:58 am

It does look like your tank has been pushed down a bit around the filler neck. Some of the replacement caps like the ones at David Silver have a different profile that is easier to grip in that situation.

cknight
honda305.com Member
Posts: 427
Joined: Wed Apr 05, 2006 3:55 pm
Location: Daytona Beach, FL

Post by cknight » Tue Oct 15, 2019 11:02 am

You do have an original fuel cap. Early ones had a polished aluminum top, later ones were chrome plated steel. Yours looks to be in good shape, so do not discard it, as someone wanting a period correct item could use it. The replacement ones are taller for easier grip, and have a better venting system to reduce leaking with a full tank. Regards, Chase

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home