honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

De-mystification -- points' components' order of assembly

Points Based Ignition | Electronic Ignition Upgrade
e3steve
h305 Moderator
Posts: 2601
Joined: Fri Oct 31, 2003 1:38 pm
Location: Mallorca, Spain & Warsash, UK

De-mystification -- points' components' order of assembly

Post by e3steve » Wed Oct 13, 2010 9:22 am

Another drawing(!), mainly for noobs; this time of the points' components. For Type-2 motors, only one set (obviously).

I'm posting this as I know some have found that there's no spark after re-assembly; this drawing places the components in the correct order. To clarify: the fibre washers sit either side of the POINTS BRACKET LUG -- the fibre ring fits inside the lug; this insulation is vital! There's no need for a spring washer under the nut as the entire assembly is under constant tension from the spring steel; just snug the nut up with a 6mm spanner or nut-runner socket.

The insulation can be tested by clipping a 12V test lamp between the motor and each set of points' tag-screw in turn; with the ignition ON -- and if the insulation is good -- the lamp will light when that set of points is open.
Attachments
Ign ON, points OPEN, lamp LIGHTS. Short the points and the lamp extinguishes. My probe is wedged between the fins for a good ground.
Ign ON, points OPEN, lamp LIGHTS. Short the points and the lamp extinguishes. My probe is wedged between the fins for a good ground.

Dgormley
honda305.com Member
Posts: 405
Joined: Tue May 19, 2009 12:31 am
Location: Tacoma Wa

Post by Dgormley » Wed Oct 13, 2010 9:11 pm

Excellent, Steve. That should help a lot of people out.

jsmith1107
honda305.com Member
Posts: 179
Joined: Wed Mar 31, 2010 8:06 am
Location: Oakdale, MN

Post by jsmith1107 » Wed Jun 26, 2013 10:37 am

Makes sense completely but as I posted in the electrical section, what if you have no spark on ONE side only? I have checked all this and still no spark, it is arcing across the right side points only. The left side works great.
1974 Yamaha DT125 Enduro
1974 Harley Davidson AMF X90
1976-7 Yamaha XS 650
2-1966 Honda Scrambler
1973 Suzuki T500 Titan

e3steve
h305 Moderator
Posts: 2601
Joined: Fri Oct 31, 2003 1:38 pm
Location: Mallorca, Spain & Warsash, UK

Post by e3steve » Wed Jun 26, 2013 2:14 pm

I'd hazard an informed guess that your condenser has failed. The condenser suppresses the points' arcing. CBs & CLs have dual condensers, as they save dual ignition systems.

EDIT: have, not save.... (Bloody iPad autocorrect!!)
Last edited by e3steve on Thu Jun 27, 2013 1:33 am, edited 1 time in total.

jensey
honda305.com Member
Posts: 384
Joined: Sun Jun 17, 2012 3:34 am
Location: Netherlands

Post by jensey » Thu Jun 27, 2013 12:41 am

Hi,

Yes, a bad condenser could be the culprit, but there's another reason for arcing across the points. It's not so common as a bad condenser, but sometimes the arcing isn't solved with swapping the condenser.

A condenser is connected parallel over the points (via ground). If the energy of this system (points / condenser) can't find "a way out", it will arc over the points, for example when a coil isn't connected properly.

Check if your coil of the right side is connected properly, or check if the coil is working. Check if the wiring to the coil is connected properly and check the connectors for oxidation.

It's advisable to swap coils for a while, or to use a spare coil to confirm that the mounted coil is working properly.

Jensen
assembly of Japanese motorcycles requires great peace of mind (Pirsig)

e3steve
h305 Moderator
Posts: 2601
Joined: Fri Oct 31, 2003 1:38 pm
Location: Mallorca, Spain & Warsash, UK

Post by e3steve » Thu Jun 27, 2013 1:45 am

Good point (no pun intended), Jensen.

Smithy, I'd suggest swapping the condensers' connections at the coils, in the first instance, and see if the fault moves to the other cylinder. This is the simplest start for diagnosis.

If the fault stays with the initial scenario, return the condenser connections to their original homes and then swap the entire ignition system wiring -- +ve & -ve Low Tension and High Tension -- in order to 'prove' the coils. In this case, if the fault moves, then you most probably have a bad coil, as Jensey suggests.

G'luck!

dajimraper
honda305.com Member
Posts: 2
Joined: Thu Dec 13, 2018 10:52 pm

Post by dajimraper » Thu Dec 13, 2018 10:57 pm

I think the answer is very relevant.

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home