honda305 Home honda305 Auctions honda305 Gallery honda305 Forum Electronic Ignition honda305 Forum honda305 Forum honda305 Forum honda305 Racing honda305 Literature

Auctions  Mailing List    Registry   Marketplace Forum - FULL SCREEN Forum

□ Search
□ FAQ 
  □ MY_ADS
Vintage Honda Owners,
Restorers, Riders and


Post Reply
fatboy98 Member
Posts: 33
Joined: Sun Aug 26, 2018 10:20 pm
Location: illinois


Post by fatboy98 » Fri Nov 29, 2019 9:49 am

Ok so i got my 67 cl77 some what back together got it running it has not ran in 37 years. i am having a problem with the clutch i dont know if it is not adjusted right or ? so when i first got it together the clutch cable felt good pulled like a cluth should. started the bike pulled the clutch in and went to put it in gear and it went into gear and killed the motor the clutch was not working at i took the side cover off and took the four bolts out of the basket and the plates were all stuck together. popped them all apart put the 4 bolts back in put side cover back on put oil in it but now the clutch pull feels like the front brake. i start the bike pull the clutch and put it in gear and the same thing happens goes right into gear and kills the motor. any help would be greatly appreciated.

Post Reply



CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home