honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

64mm liners

CYP77 - Police | Race Bikes | Choppers, Bobbers and Mods
User avatar
G-Man
honda305.com Member
Posts: 5678
Joined: Wed Mar 25, 2009 5:17 pm
Location: Derby, UK
Contact:

Re: 350 barrels/pistons

Post by G-Man » Wed Jul 02, 2014 3:11 am

AlanW wrote:Hi, I have just what you need, ART pistons +0.25 and barrels in new condition they are off my cb72. This is my 1st post on this forum and I am not sure of procedures or how to contact other members so bear with me. I live on the Wirral.
Alan

Welcome to the forum. Dave is after some 64mm liners and pistons for a big bore kit.

G
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F

DaveM
honda305.com Member
Posts: 10
Joined: Tue Dec 23, 2008 7:23 pm
Location: Wirral near Liverpool UK

64mm liners

Post by DaveM » Wed Jul 02, 2014 6:05 am

Hi Alan welcome to the forum, i have sent you a P.M
Dave.

AlanW
honda305.com Member
Posts: 167
Joined: Tue Jul 01, 2014 6:33 am
Location: Wirral UK.

64mm liners.

Post by AlanW » Fri Jul 04, 2014 3:32 am

A belated thanks for the welcome guys.
Alan.

teazer
honda305.com Member
Posts: 798
Joined: Mon Feb 08, 2010 10:32 pm
Location: Midwest US

Post by teazer » Fri Jul 04, 2014 12:48 pm

That's an easy one - or used to be. Grab a used CB750 cylinder block, heat and let the liners drop out. They need to be shortened a little and that's about all there is to it.

I know guys who used to bore out stock CB77 liners to take 64mm pistons but that leaves them really thin.

DaveM
honda305.com Member
Posts: 10
Joined: Tue Dec 23, 2008 7:23 pm
Location: Wirral near Liverpool UK

64mm liners

Post by DaveM » Fri Jul 04, 2014 2:50 pm

Teazer cb750 are 61mm can they be bored out to take 64mm pistons ? which i suppose would leave them really thin also, i am not trying to run a 305cc . 64mm bores give 347cc .

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Fri Jul 04, 2014 3:19 pm

Good ta see ya again. ..............lm

teazer wrote:That's an easy one - or used to be. Grab a used CB750 cylinder block, heat and let the liners drop out. They need to be shortened a little and that's about all there is to it.

I know guys who used to bore out stock CB77 liners to take 64mm pistons but that leaves them really thin.

User avatar
G-Man
honda305.com Member
Posts: 5678
Joined: Wed Mar 25, 2009 5:17 pm
Location: Derby, UK
Contact:

Re: 64mm liners

Post by G-Man » Fri Jul 04, 2014 3:57 pm

DaveM wrote:Teazer cb750 are 61mm can they be bored out to take 64mm pistons ? which i suppose would leave them really thin also, i am not trying to run a 305cc . 64mm bores give 347cc .
That was one of the most common parts to use and yes, they will be thin. I have a CB750F barrel but haven't dropped the liners out to measure them yet. They start off at 62mm with a shorter stroke (62 x 62) compared with the CB750k (61 x 63 ).

Teazer - welcome back!

G
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home