1964 benly CA95 new bike

nation · Post by **nation** » Fri Aug 16, 2013 8:26 pm

i got a hold of this bike. gas is stablized but has been sitting 2 years. I'm going to drain tank and put fresh gas. my question: how much oil does this motor hold? the seller says its a 150cc. ive heard they are 160cc? Nation

Lassociety · Post by **Lassociety** » Sat Aug 31, 2013 10:11 pm

I have a few of these bikes.

First off, 150cc or 160cc is the cylinder displacement, or size of engine, so seller might be confusing this with oil quantity. Drain all the oil out, and fill it up slowly until it registers on the high mark on the dipstick when inserted, but not screwed down.

Mine usually take less than 1 quart, but I'm looking at the dipstick, not the oil can.