honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Stator on 66' CL77

Charging System, Wiring, Lighting
Post Reply
User avatar
moondoggers
honda305.com Member
Posts: 102
Joined: Thu Jul 18, 2013 11:53 am
Location: Paulden, Arizona

Stator on 66' CL77

Post by moondoggers » Tue Jul 28, 2020 5:04 pm

Upon routine tune-up & inspection I found the stator winding's to be loose, so I am looking for a viable stator to purchase.
Thank you.
66' CL77, 63' CB77, 73' Jawa 350/ model 362 Californian 65' Jawa 250/model 590 07' Moto-Guzzi 1100 Griso

DJM
honda305.com Member
Posts: 553
Joined: Thu Oct 09, 2003 1:54 pm
Location: Chesterfield UK

Re: Stator on 66' CL77

Post by DJM » Wed Jul 29, 2020 3:05 am

If the stator is still working OK you should be able to fix it. The coils are basically held in place by two thin steel tabs bent outwards over the coils,

Try tapping these back into place Gently to see if this helps, You could also fix them in place using a thin epoxy resin mix poured into the space around the coils, not to much and perhaps only one or two coils at a time to let gravity help the stuff get where t's needed.
Why not give it a try as you don't have much to loose.

User avatar
moondoggers
honda305.com Member
Posts: 102
Joined: Thu Jul 18, 2013 11:53 am
Location: Paulden, Arizona

Re: Stator on 66' CL77

Post by moondoggers » Thu Jul 30, 2020 1:36 pm

Yes, I will give it a go . Like you say I have nothing to lose.
66' CL77, 63' CB77, 73' Jawa 350/ model 362 Californian 65' Jawa 250/model 590 07' Moto-Guzzi 1100 Griso

User avatar
moondoggers
honda305.com Member
Posts: 102
Joined: Thu Jul 18, 2013 11:53 am
Location: Paulden, Arizona

Re: Stator on 66' CL77

Post by moondoggers » Sun Aug 02, 2020 1:02 pm

I don't see the tabs I should bend back, can you show me a picture ?
66' CL77, 63' CB77, 73' Jawa 350/ model 362 Californian 65' Jawa 250/model 590 07' Moto-Guzzi 1100 Griso

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: Stator on 66' CL77

Post by LOUD MOUSE » Mon Aug 03, 2020 4:21 pm

The winding is a coil. In the middle is a steel part with tabs on the inside and outside of the steel. ..............lm

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home