honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

another 1961 cb72

Want to keep a Restoration Log? Post it here! You can include photos. Suggested format: One Restoration per Thread; then keep adding your updates to the same thread...
User avatar
G-Man
honda305.com Member
Posts: 5678
Joined: Wed Mar 25, 2009 5:17 pm
Location: Derby, UK
Contact:

Post by G-Man » Sun Mar 01, 2015 7:49 am

Ken

The SLS front brake lasted to Chassis number 11548, so yours should have one. I have a genuine seat for mine but it needs work.

Image

Yes - I'm not convinced that Honda were any better organised than any other manufacturer when it came to using parts. I have two early style front fenders but neither is alloy. One had a numberplate on it which I could date to October 1961.

I think it's amazing that we have unearthed three 1961 CB72s that were probably made on the same day and arrived in England on the same shipment, all painted blue. They will have to be reunited one day...


G
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F

kenny258
honda305.com Member
Posts: 15
Joined: Mon Nov 14, 2011 5:11 pm
Location: chipping sodbury england

Post by kenny258 » Sun Mar 01, 2015 9:15 am

G-Man
Since my bike spent all it's life on the track it's logical that the brake would have been replaced as a matter of priority.
It would be great to see them all together one day.

Alan
Would you be interested in selling the seat brackets, that would save me a lot of work

Today I've been trying to check the alignement of the frame, because when it was damaged as long as we got the wheels back in line other mounting point did not matter.
Would it be possible for either you or George to check the dimentions shown on the frame.

Imagedimentions by kennethstevenscb72, on Flickr

Its a good job I didn't have access to a spare frame at the time as mine would have been chucked.

Ken

User avatar
G-Man
honda305.com Member
Posts: 5678
Joined: Wed Mar 25, 2009 5:17 pm
Location: Derby, UK
Contact:

Post by G-Man » Sun Mar 01, 2015 9:46 am

Ken

Here we are....

Image

Image

Image

Image

The final measurement is from the front edge of the rear slot to the centre of the pin. You need to add 4-5mm to get the centre distance.

G
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F

kenny258
honda305.com Member
Posts: 15
Joined: Mon Nov 14, 2011 5:11 pm
Location: chipping sodbury england

Post by kenny258 » Sun Mar 01, 2015 2:47 pm

Thanks G-Man mine are not too far off at present, just the right tube is a bit twisted as you can see from the rods I fitted.

Ken

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home