Page 22 of 24
Posted: Wed Aug 04, 2010 4:53 am
by 4shorts
CliffC wrote:Hi Paul,
It was good seeing your post, glad your still around and checking in on the site. Hope you are enjoying your summer and getting some riding in. Cliff
Hi Cliff. Ya I still drop by once in awhile. We have been busy at the shop as well so not allot of time to ride or look around the net. Got about 1000 miles put on the wing this summer. Picked up a few new tools for the shop so they been keeping me busy. Here's a few links to check them out. Hope all is well on your end buddy. Very nice to see your still around here as well. Thanks for the note. Paul
http://www.tractorbynet.com/forums/weld ... -week.html
http://www.tractorbynet.com/forums/weld ... rival.html
http://www.tractorbynet.com/forums/weld ... orker.html
Honda C200 Information
Posted: Wed Jan 19, 2011 12:55 pm
by NBD925
Hi 4shorts: I know you must here this all the time but . . . wow you are good! I follow all your threads and I am currently working on a 1962 CA77 Dream and a Honda C200. I hope they turn out half as well as yours do.
My questions are about the Honda C200.
What Are your frame and engine number? The reason I ask is: Mine are Engine# C200E-53086 and my Frame is C200-113379 they seem weird to me.
What Carb models came on these bikes: I have two Carbs, they both look alike and match the look of all the C200 Carbs I have seen in pictures. They are marked on the intake flange: C20D and the second carb: CB E (the CB is small font and the E is larger)
Here are the pictures of the CB E Carb I have: I believe this to be the original carb that came with the bike.
P1190030 by
adam.corts, on Flickr
P1190032 by
adam.corts, on Flickr
P1190031 by
adam.corts, on Flickr
What model Carb do you have on your C200?
Also What are the Carb specs and where can I find them? (IE: Main Jet, Slow Jet, Float level, the works.)
I know I have a lot of questions but these are the mysteries that are unsolved for me and I hope you can help. What book did you use for your restoration? Parts/Shop manual
Thanks 4shorts
Adam
Missoula, Montana
Re: Honda C200 Information
Posted: Wed Jan 19, 2011 6:54 pm
by 4shorts
Posted: Wed Jan 19, 2011 10:16 pm
by rrietman
17again; do you still have the C200 muffler? I'm in the market for one.
Thanks
Randy
Bellingham Wa.
honda c200 manual/engine building specs
Posted: Wed Mar 23, 2011 8:55 pm
by injunjustin
Hi all,
I am currently restoring a honda c200 and have been looking around for some engine specs, like some torque specs, setting the engine and ignition timing, piston ring gap and ect. I was wondering if anyone out there knows where i could get these specs in a manual or what ever?
Thanks,
Justin
Posted: Thu Mar 24, 2011 1:45 am
by G-Man
Hi Justin
Not much on eBay
http://shop.ebay.com/i.html?_nkw=honda+ ... m270.l1313
You could try this forum for help.
http://autos.groups.yahoo.com/group/cla ... dhonda50s/
I know that yours is a 90 but you should get some response if the guys from this forum cannot help.
G
Posted: Thu Mar 24, 2011 8:28 pm
by injunjustin
Thanks for the response i'll give those a try.
-Justin