Home Auctions Gallery Forum

honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers


Engine vent hoses on a 66 CL77?

eyedragaknee
honda305.com Member
Posts: 131
Joined: Thu Jul 31, 2008 12:49 pm
Location: NC
Contact:

Vent tubes

Post by eyedragaknee » Wed Sep 10, 2008 6:09 pm

My carbs and timing are fine. The bike runs very well. I am getting oil on the plugs and sure it needs rings. I wanted to minimize any additional oil getting in the cyl if the vent lines were plugged up.

The top one is fine. The 2 going to the intake valves might be plugged and letting oil get past the intake valve from the rocker? That was my question. I think that can happen.

I will pull them and check.

User avatar
davomoto
honda305.com Member
Posts: 2508
Joined: Sat Nov 18, 2006 7:36 pm
Location: Marin County CA

Post by davomoto » Wed Sep 10, 2008 8:22 pm

I don't think they would cause that symptom if blocked, as Honda eliminated them late in the model run.

davomoto

eyedragaknee
honda305.com Member
Posts: 131
Joined: Thu Jul 31, 2008 12:49 pm
Location: NC
Contact:

vent tubes

Post by eyedragaknee » Wed Sep 10, 2008 8:56 pm

Thanks DM

That is good information.

Post Reply