Cannot advance points plate far enough

norman · Post by **norman** » Wed Oct 05, 2016 2:04 pm

My name is Norman I picked up a cl-77 it had been sitting awhile, I did the usual things and got it running , I went to time it and the points plate is advanced all the way and needs a little more to be in time. Is there a adjustment to center this plate in the slot to allow more advance? Thank you

LOUD MOUSE · Post by **LOUD MOUSE** » Wed Oct 05, 2016 5:30 pm

Call me at 830-895-0654 or give me your number and I'll talk you through the adjustment. ...........lm

norman wrote:My name is Norman I picked up a cl-77 it had been sitting awhile, I did the usual things and got it running , I went to time it and the points plate is advanced all the way and needs a little more to be in time. Is there a adjustment to center this plate in the slot to allow more advance? Thank you

ericmanuel · Post by **ericmanuel** » Wed Oct 05, 2016 7:17 pm

Would like to know the outcome of this after your phone call.

eric manuel

LOUD MOUSE wrote:Call me at 830-895-0654 or give me your number and I'll talk you through the adjustment. ...........lm

norman wrote:My name is Norman I picked up a cl-77 it had been sitting awhile, I did the usual things and got it running , I went to time it and the points plate is advanced all the way and needs a little more to be in time. Is there a adjustment to center this plate in the slot to allow more advance? Thank you

norman · Post by **norman** » Wed Oct 05, 2016 10:27 pm

Thank you Loud Mouse ,I will call you Thursday evening .Norman

davebern · Post by **davebern** » Thu Oct 06, 2016 1:45 am

This happened to me and it turned out the cam timing was out by 1 tooth.....

LOUD MOUSE · Post by **LOUD MOUSE** » Thu Oct 06, 2016 6:06 am

Which is the first thing we will check. .................lm

davebern wrote:This happened to me and it turned out the cam timing was out by 1 tooth.....

LOUD MOUSE · Post by **LOUD MOUSE** » Thu Oct 06, 2016 6:07 am

Good deal. ..................lm

norman wrote:Thank you Loud Mouse ,I will call you Thursday evening .Norman

Honda305.com Forum

Cannot advance points plate far enough

Cannot advance points plate far enough

Re: Cannot advance points plate far enough

Re: Cannot advance points plate far enough