Does anybody have a Gunson Colortune, and does it work?
The concept looks pretty cool, and everything online is inconclusive, but after much research I pulled the trigger anyway.
I bought the 12mm one, which should fit my CA's, but I don't know if I need a 'long-reach' 12mm one for the CA's I have; any ideas?
Does anybody know the difference between a 14mm and 14mm 'taper' adapter?
I'm also hunting a 12mm into 14mm adapter for the aforementioned Colortune, if anybody has one they don't want or need.
Gunson Colortune / 14mm Adapter
Did you buy it from an Antique Shop?
Seriously I'm amazed that they are still around, I had one well around forty-five years ago, bought it to use on my van, couldn't afford a car back then. From what I recall, the results ( indications?) were pretty inconclusive and don't remember what I did with it! Never tried it on a bike, can't even remember if I was riding one at that time. Let us now how you get on with it, perhaps I should look round and find another 12mm one as I still have a Cb77 and CL77 in the garage!
Thanks guys, I will...
No, DJM, they're still making them. I ordered a 12mm for my CA's, but of course my other bikes take a 14mm spark plug, which they either don't make anymore or are hard to find; and I just picked up an inline-four '78 KZ650, so I'm thinking I'm going to need one. They look pretty cool, and seem (according to research) take a lot of the guess work out of where to put the A/F screw, so I thought I'd try it.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||