new to 305 scramblers splitting engine case

stripertwink · Post by **stripertwink** » Sun Jan 28, 2018 10:44 am

i just picked up a 1965 305 scrambler and I'm going to go through the whole bike. right now I'm trying to split the engine case to look at the transmission gears, and i can not get them apart,any tips or trick??

LOUD MOUSE · Post by **LOUD MOUSE** » Sun Jan 28, 2018 11:48 am

Where do you live?. .................lm

stripertwink wrote:i just picked up a 1965 305 scrambler and I'm going to go through the whole bike. right now I'm trying to split the engine case to look at the transmission gears, and i can not get them apart,any tips or trick??

pemdoc65 · Post by **pemdoc65** » Sun Jan 28, 2018 1:18 pm

Make sure that you have removed the two nuts on the top of the crankcase that are located under the metal tab that the valley cover attaches to. Those get overlooked quite often.

stripertwink · Post by **stripertwink** » Sun Jan 28, 2018 9:25 pm

thank you pemdoc65 once i took those off it came right apart.
my next question is I'm looking to replace all the seals and i haven't found a gasket for the engine case halves?? is there one or is it just silicone? [/quote]

rrietman · Post by **rrietman** » Mon Jan 29, 2018 12:14 am

HondaBond
Good luck
Randy

LOUD MOUSE · Post by **LOUD MOUSE** » Mon Jan 29, 2018 1:54 am

Or YAMABOND from YAMAHA. ...............lm

rrietman wrote:HondaBond
Good luck
Randy

stripertwink · Post by **stripertwink** » Mon Jan 29, 2018 12:09 pm

Thank you

Honda305.com Forum

honda305.com Forum

new to 305 scramblers splitting engine case

new to 305 scramblers splitting engine case

Re: new to 305 scramblers splitting engine case

thanks