honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Stator Crankshaft Bolt Torque

Post Reply
qwispichkn
honda305.com Member
Posts: 28
Joined: Thu Aug 30, 2018 11:39 am
Location: Gettysburg, PA

Stator Crankshaft Bolt Torque

Post by qwispichkn » Sun Oct 21, 2018 1:22 am

Anyone know the torque spec on the stator bolt crankshaft torque spec. None of my manuals list it.
Thanks
2016 HD Streetglide Special
2010 HD Fat boy
1965 Honda Dream CA77
2006 Kawasaki Klx250S

DJM
honda305.com Member
Posts: 553
Joined: Thu Oct 09, 2003 1:54 pm
Location: Chesterfield UK

Torque setting.

Post by DJM » Sun Oct 21, 2018 4:33 am

I assume we're talking C/CB/CL72 series?

I've never had one come loose with just sensible hand tightening and certainly never used a torque wrench on one.

If you want a torque setting I'd go somewhere around 14 - 5 ft lbs ( same as the cyl. head and crankcase studs) and you should be OK.

If you're a real worrier you could add a small dab of LOW strength Loctite or similar.

BTW, the bolt from the later CB250/350 engines is much nicer as it has a good thick 'washer' ready machined under the hexagon.

qwispichkn
honda305.com Member
Posts: 28
Joined: Thu Aug 30, 2018 11:39 am
Location: Gettysburg, PA

Post by qwispichkn » Mon Oct 22, 2018 1:09 am

Yes CA77.
Thanks
2016 HD Streetglide Special
2010 HD Fat boy
1965 Honda Dream CA77
2006 Kawasaki Klx250S

Post Reply
cron




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home