honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

CA77 Petcock Screws

Post Reply
Dr. Frankenstein
honda305.com Member
Posts: 568
Joined: Tue Feb 02, 2010 7:11 pm
Location: Charlottesville, VA

CA77 Petcock Screws

Post by Dr. Frankenstein » Fri Mar 15, 2019 7:38 am

Does anybody happen to know, offhand, what the size and pitch is for the screws that hold the petcock onto the tank?

Didn't Honda make them proprietary, or does anybody know where I can get some aftermarket ones??

User avatar
Seadog
honda305.com Member
Posts: 1272
Joined: Thu Dec 25, 2014 9:54 am
Location: Cape Cod, MA

Post by Seadog » Fri Mar 15, 2019 7:47 am

Those are M5s so probably M5 x 0.9 x 25 (JIS) Try Ohio Cycle.

Dr. Frankenstein
honda305.com Member
Posts: 568
Joined: Tue Feb 02, 2010 7:11 pm
Location: Charlottesville, VA

Post by Dr. Frankenstein » Fri Mar 15, 2019 8:01 am

Thanks Seadog -

And how about the length of the mainstand spring...? How long is that, approximately, when it's 'unsprung'/ not under tension...?

User avatar
Seadog
honda305.com Member
Posts: 1272
Joined: Thu Dec 25, 2014 9:54 am
Location: Cape Cod, MA

Post by Seadog » Fri Mar 15, 2019 9:31 am

Sorry, I don’t have one to measure. Perhaps someone else could help.

Post Reply
cron




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home