honda305.com Forum
Vintage Honda Owners, Restorers, Riders and Admirers
Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe
Search found 4 matches
- Tue Jul 13, 2010 2:05 am
- Forum: Honda: Other Twins
- Topic: need help with my cb160
- Replies: 7
- Views: 14789
need help with my cb160
I can't get my cb160 to idle corectly. I have done a full tune but the problem continues. no matter what adjustment I do to the carb the bike will either rev up to 2000rpm or more, or it will just stall. There is no happy medium. Also when I ride the bike it has a bit less power than it should top ...
- Tue Jul 13, 2010 1:55 am
- Forum: Honda: Other Twins
- Topic: dyna coil / electronic ignition for cb160
- Replies: 3
- Views: 6458
dyna coil / electronic ignition for cb160
Hi does anyone know what kind of dyna coil I need to replace my stock cb160 coil, I'm not sure what number dyna coil I need, I'm also looking for an electronic ignition to replace the points, I heard that petronix ignition can be used but again i'm not sure what the part number on the petronix is or ...
- Fri May 28, 2010 6:21 pm
- Forum: Honda: Other Twins
- Topic: Need help starting my cb160
- Replies: 7
- Views: 7237
I got it fixed. One of my new spark plugs was faulty and would not spark, i was checking all the electrics and than swaped spark plugs and whoooallaaa no spark only on that perticular spark plug, so I changed it and it fired right up and ran like a dream, well not exactly. I found out that it is ...
- Sun May 23, 2010 6:29 pm
- Forum: Honda: Other Twins
- Topic: Need help starting my cb160
- Replies: 7
- Views: 7237
Need help starting my cb160
Hi I just bought a cb160, the bike was not running when I bought it but was
complete. I changed all the fluids checked the compression and it checked out
good 150psi at each cylinder. Than I tore apart the carbs to every nut and bolt,
and cleaned them. Put new spark plugs on and tryed to fire the ...
complete. I changed all the fluids checked the compression and it checked out
good 150psi at each cylinder. Than I tore apart the carbs to every nut and bolt,
and cleaned them. Put new spark plugs on and tryed to fire the ...