honda305.com Forum

I've also heard that over tightening the carb mounting nuts can interfere with throttle operation.

Add the acid full strength to the battery. When the electrolyte levels are low, top off with distilled water. Don't forget to charge the new battery before trying to start the bike.

I bought a set a while back but haven't installed them yet. The quality appears very good and they look almost identical to the originals. There have been some issues with the front bolt holes reported. Try searching this forum as others already have shared their experiences with these and other ...

Nice work, Max! Happy to see it come to life.

Sounds good. An inline fuse might be a good idea too. 10 amp - 15 amp should do nicely.

Well looks like we're getting closer. I don't know what logic is behind the no resistor needed for twin cylinders notion. Since both coils will be energized at the same time, albeit momentarily, separate resistors should be utilized. You will need an ohm meter to make the final decision on a ...

A word about your ignition coils.... The coils in your pictures are automotive type coils. As the printing on the side indicates, an external ballast resistor is required for each of the coils. Because of their very low primary resistance, a resistor or resistive wire is used to prevent excess ...