Page 3 of 3
Re: black center stand
Posted: Sun Jun 11, 2017 5:44 am
by LOUD MOUSE
As I recll the tail light bracket came black also. ........lm
Clarke wrote:Thanks Loud Mouse I guess I never gave the center stand much thought. I did paint the side stand black but I was not able to get the center stand off of the bike so I left it alone.
Bike runs
Posted: Thu Jun 22, 2017 1:24 am
by Clarke
I started my honda dream up. I ended up using a mikuni vm22 carburetor to replace the stock carburetor. It fits good after a few mods and i also drilled out the main jet from .036" to .045" to get it running right. Ill order the right main jet right away. I also replaced the stock rectifier with a tiny solid state part as per the instructions on this site. We dont have radio shack in canada so i had to buy one locally at B&E Electronics, thanks to our members who outlined that install in detail it works good. Im verry excited after riding around my area a few times this bike is so unique. Ill post some more details soon
Bike runs
Posted: Thu Jun 22, 2017 1:24 am
by Clarke
I started my honda dream up. I ended up using a mikuni vm22 carburetor to replace the stock carburetor. It fits good after a few mods and i also drilled out the main jet from .036" to .045" to get it running right. Ill order the right main jet right away. I also replaced the stock rectifier with a tiny solid state part as per the instructions on this site. We dont have radio shack in canada so i had to buy one locally at B&E Electronics, thanks to our members who outlined that install in detail it works good. Im verry excited after riding around my area a few times this bike is so unique. Ill post some more details soon
Nice!
Posted: Mon Oct 02, 2017 9:57 am
by sunpraiser21
Nice score!