honda305.com Forum

I read one of the Honda history links on-line and they said that Mr. Honda had went to
Germany in 56-57? and took notes on the super-max so it looks like Honda was coping European designs.

mike1969 wrote:Wow,That looks a lot like the early Dreams.I wonder who copied off of who?

This month in 2008 I started taking my '65 Dream apart and as I knew it would need tires I started looking for a set of tires, in 3.25-16" and heard about the Firestone/coker white walls but that they were not the best handing tire and the tread pattern looked like something off a 1927 Model T; so I...

I agree with LM. Back when Hotshoe started this thread it was because the Non-Stock Keyster needles didn't work right but the Stock Honda needles did. Clarence I think I'll throw in on this. In my opinion if ya have the valves set correctly (assume the adjuster screws have a good contact surface and...

Here is the cap after 48hrs in the cooker: http://i758.photobucket.com/albums/xx223/clarenceada/th_IMG_2112.jpg Most of the rust scale has come off with a little scrubbing but inside where the spring is the rust is still solidly holding the latch from moving---line of site problem---can these caps b...

Hi, Steve: Can we just drop the usual veil of the internet for a moment and let me talk on a personal level without any rancor intended on my part (slap me if I get maudlin) and not have to back everything right now with outside verification, although I can if you want. If you will look at the time ...

Steve: What, in the name of Newtons Laws of Physique's, are you going on about here! Are you saying that the body isn't necessary?, for the engine to run, what about all them hot gases poring out of the spark plug hole without the Body to keep all them hot gases where they belong; instead of up your...

Steve: combustion starts between the electrodes but it burns thru the whole Combustion Chamber, if your getting good combustion. Steve: Combustion doesn't take place around the plug body (only between the electrodes) so I'd expect to see the bottom of the threaded portion slightly blackened in compa...