Does anyone know where a replacement starter button on right-hand control can be purchased? Mine has a small piece missing causing it to push in at an angle or getting stuck.
The part number may be 35317259300. The starter button may also be the same as the horn button on the left-hand control.
Search found 29 matches
250 Dream Fuel Tank Mounting Bracket?? (Left Side)Does anyone have a fuel tank mounting bracket (left side) for a 250 Dream?
This one was missing when I purchased the bike and looks like the weld broke off from the frame. Any suggestions would be greatly appreciated. Thank you.
CL77 rEWIREDo you have an ohmmeter? You really need on ohmmeter/voltmeter to test either continuity (ohms) or 12 volts/ground (voltage). Take your time and test each wire or circuit (for voltage, ground, or continuity) before and after replacement. REMOVE the fuse or disconnect battery wires when replacing any...
CA72/77 Combination Ignition Switch InternalsThe Switch Matrix Diagram IS a necessary tool, even in the real world of CA72/77 electrical trouble shooting. After reviewing the Matrix, along with the assistance of your trusty ohmmeter, one can easily determine whether a CA72/77 combination/ignition switch is operating properly. I highly recommen...
CA72/77 Combination Ignition Switch Internals-PhotosCA72/77 Switch disassembly/assembly
CA72/77 Combination Ignition Switch InternalsTechnical difficulty uploading internal switch contact photos for now. However, the 3 triangular contacts should be positioned as follows: 1. remove key from off position. 2. split switch in half...triangular contacts on one side, wire connections on the other. 3. set open slot in switch contact bod...
CA77 Ignition Switch InternalsGreat news!! Just took some photos of the correct internal contact positions for the CA 77 Combination/Ignition switch. Hope to get the photos posted tomorrow. Really quite simple after disassemly/assembly several times with diagram. [b]Caution[/b]: .... once apart, do not force switch halves back t...
|