Honda305.com Forum

Hahnda I looked on Ohio's sight and they do not have the CA77 plates. Thanks for the thought. They listed the part number followed by the thickness and a blank spot for quanity:(

Hey Mouse good info. This is a 1966 and it has all the items you discribed. I would like to keep it as stock if I could get the right thickness plates, but will settle for working well first. Is there no avalibity for the 4.9mm plates? I will edit the location right after this post. It is Orlando FL...

Hey Mouse are you sure? Wouldn't that mean there would be different part numbers and specs for the different parts. I only see one part number for the 5 plates (per IN). The manual says the spec thickness for CA77s is 4.7mm-4.9mm with 4.4mm as a service limit for all 5. The CB77 is the 2.9-3.0mm wit...

everything looks good from the pic just make sure all pins and rings are aligned for all bearings before clamping down. They are on the crank and both tranny shaft bearings

Anyone know of a source for proper friction plates for CA77? CB77 plates all over the place but having a time finding CA77 which are thicker.

Has anyone ever heard of the possibilty or reality of placing the cams on the wrong side of the cam sprocket and having the bike run but be noisey?