Honda305.com Forum

Thanks to all for your great responses and thanks to Seadog for the pic. I definitely don't have that pigtail for the horn. I searched all over in the frame and under the tank and behind the horn mount but someone has removed it and then taped up the wire harness with electrical tape. Who knows why ...

Bob, the wiring for the horn is in the wiring harness. two wires should be hanging down in the area of the horn for connection. Wiring for the switch should be within the handlebar and connected to the main harness in the headlight bucket. Has that been cut out? The wire from the horn button is the...

My CA77 had no horn when I bought it so I picked up a working horn and am now trying to figure out the wiring. I've got the black wire from the horn switch coming down through the handle bar and think that attaches to one side of the horn. But I have no second black wire behind the horn mount to con...

If you go back and read this thread - http://www.honda305.com/forums/ca77-lamp-conversion-t5820.html - and take a look at the photo posted by joeweir1 back in 2006 it appears that he just high temp RTV'd the bulb in place without any additional holder. The photo of the bulbs I've got coming from Am...

If you go back and read this thread - http://www.honda305.com/forums/ca77-lamp-conversion-t5820.html - and take a look at the photo posted by joeweir1 back in 2006 it appears that he just high temp RTV'd the bulb in place without any additional holder. The photo of the bulbs I've got coming from Ama...

Here's a link to the bulbs....

http://www.amazon.com/Eiko-Halogen-Bulb ... B002301JRI

Thanks for the link to the earlier post. I found a couple of 35 watt halogen #48220 bulbs and holders on Amazon. It looks like they make a nice installation and don't draw too much power. Now I'll just have to figure out which tabs are high and low beams and which is ground.