Search found 126 matches
Re: Center engine cover cb77e 1967 honda 305There are several engine covers currently listed on eBay. Here's one listing: https://www.ebay.com/itm/126291033100?
Re: Crankcase clacking when hot - NOT kickstartThe cam chain guide and pin assembly bolts to top of upper crankcase between the middle cylinder head studs. Splitting cases not required if cam chain is to be reused. Believe the cases must be separated to install a new cam chain. Other noise sources I had considered were piston slap (usually lesse...
Re: Crankcase clacking when hot - NOT kickstartHad a similar experience with 1967 CL77 Scrambler. Same type of noise. One of the 6mm knock bolts (90081-253-000) that secure the cam chain guide roller pin had totally backed out, causing the chain guide assembly to swivel slightly on the remaining knock bolt, binding / twisting the chain and guide...
Re: Need new rear shocks for my 67 CL77Many are listed on eBay in various conditions: search "CL77 shock"
Re: 1967 Fenders/Grab BarSeen on eBay today: https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2332490.m570.l1313&_nkw=186328222378&_sacat=0 https://www.ebay.com/itm/134653517151? https://www.ebay.com/itm/204396940759? There are some lesser quality (dented and/or needs paint) fenders also listed, depending on what you're l...
Re: How screwed am I?Interesting to speculate about how so much water accumulated in the Scrambler's cylinders. Parked in wet weather, or was it hosed down with spark plugs removed? The rest of the bike shows wear and tear, but doesn't show a comparable amount of rust, corrosion and water damage. About the camshaft: How...
Re: Left air filter side cover / pipes removalOn a CL77 or CL72; many will say to completely remove the pipes, then the LH side cover can be removed. If lucky and your CL77 is cooperative, the following method can work: Remove the muffler can if so-equipped. Loosen both exhaust pipes at the head just slightly, which allows some wiggle movement....
|