Honda305.com Forum

I have a 1965 CA77 and the right side plug hole stripped out. I installed a coil in the hole to get the plug in. It has started smoking on the right side and fouling the plug. Is there somewhere to get the heads so I can get it back together with a coil in the plug hole. Thanks Henry

the silver part that is screwed down with three screws and the part that holds the spring, pin , and roller bearing.

Hi I have a 1965 Dream that I have been tinkering with. The starter clutch was slipping so I bought new parts for it. While I was putting it back together I noticed that the housing has a crack in it. I went ahead and installed the clutch but it is still slipping. Any ideas on if the crack will caus...

I have a 1965 Dream and all of a sudden the starter button on the handlebars stopped working. Does anyone know where I can a new button. I may need the whole thing, I'm just not sure at this time. Thanks for your help

The spring looks to be number 3 on the parts diagram but there is no rubber coating it. I guess I will need a new one and an air filter box to get it back in shape.

Nothing happens when I push the button. I can jump across the starter solenoid and the starter will turn. I will check the wiring this weekend and see if that's the problem. It was working one day and then the next time I tried to crank her up it wouldn't do anything. Thanks for the info.

I have a 1965 Dream 305 and the starter push button switch isn't working. The motorcycle will crank up with the kick starter but I want to replace the push button. I have been looking for a few days at all kinds of sites but still can't find one. Any advice on where I might find one. All the parts a...