Search found 57 matches
Front fork pistonsAs I continue my trail and error on these pinned front fork Pistons it appears they are not interchangeable. From what I can tell the fork piston was assembled to the fork tube then the holes were drilled and pinned with subtle differences in the spacing from fork tube to fork tube. In fact you have...
Front Fork PistonG-Man
Sent PM (I think - new to the whole PM thing). Let me know if you don't get one. Husker
Fork pistonsThanks G-man. Would happily reimburse you for their value and shipping. Enjoy your week.
Husker
Fork pistonAfter disassembly and inspection on the fork pistons they are below minimum spec for outer diameter plus had what I would best describe as flats wore on one of them. Based on my review of the parts diagram these pistons should have a part number of 51442-268-040. When I called Nick at Ohio Cycle the...
Front fork disassemblyG-man thanks for the photo, worth a thousand words as they say. I'm wondering how my fork ended up with no circle clip holding the damper valve in place. I had one circle clip in the upper groove and the second circle clip above that one free to slide on the fork tube. This allowed the damper valve ...
Front fork disassemblyAfter finishing my chores I went back to work on the fork. I got the knock pins out and disassembled it. However I am confused. On the pipe fork there are two grooves for snap rings. On my fork there was no snap ring in the lower groove, one snap ring in the upper groove, and a snap ring just floati...
Front fork disassemblyThanks Loud Mouse and G-man. Another example of why I like this forum so much.
Husker
|