Search found 408 matches
Re: Tach Drive Cover ProblemIt probably doesn't need to be said but I'll say it anyway. Use only one gasket. This cover and its mate on the right side hold the camshaft in place. (Note the ridge that lines up with the outer race on the bearing.) Two gaskets would leave a lot of end play in the camshaft.
Re: Wiring Challenges OMGMy harness had problems, especially with the terminals. I found suitable terminals on Ebay which weren't terribly expensive and they worked well. If you search Ebay for "open barrel bullet terminal" you will find them. Get a crimping tool too. Some sets of terminals come with crimpers for remarkably...
Re: Wiring Challenges OMGIt's pretty clear that the 'new' wiring is not for a CB77. You do however, have a source of wire and connectors that may be useful in restoring your old harness to working condition.
Re: CA95 Fuel Petcock screw questionI wondered if there might be a market for this pre-ISO hardware if I could find a source and I indeed found one. I managed to get a quotation on some screws on Alibaba and the price was excellent, only a few cents each. The only problem was the minimum order, 1 tonne. I won't soon be selling any.
Re: Exposed windings on statorYes, I should have thought of contact cleaner. Effective and safe for the stator.
Re: Exposed windings on statorFortunately you appear not to have an electrical problem. The tape that covers the coils is just for physical protection so you don't actually have to do anything. These tend to get dirty and oily because they are close to the breather outlet, the chain and perhaps a leaky oil seal. I have never bee...
Re: I posted alot of CB77 Parts on ebayThe link shows no items at all to sell.
|