Wow, that was a steal, good find!!
Gunner
Search found 307 matches
3. Missing insulation on the stator. I saw on another thread where silicone was used. How has that held up? I'm a little concerned about adhesion as here was a lot of oil in the side case. I don't want to use any strong chemicals, such as carb cleaner, to clean it off for fear of stripping the coat...
Are the slides in the carb sticking open? If you pull the boots off, you can use your fingers to feel the slides move as you work the throttle (engine off of course). If the slides are closing, you should check to see if the jet needle on the slide has the clip installed right. If the needle can pus...
Are you getting a weak spark between the base of the plug and the motor (head)? If you are not getting a spark to jump from the gap, and your getting a spark from the base of the plug, the plug is shorted and bad. I had this problem on another bike not long ago. If your sure it's not the plug, look ...
Re: plug against head - NO SPARK, plug close to head - SPARK bike was running 3 days ago and have not made any electrical changes since last running. now it won't start and i know it's getting fuel. i pulled spark plugs and when i press them up against the head, i get nothing. but when i put plug really close (but not touching) to head, i get weak spark jump...
|