Honda305.com Forum

Hi 48, Do you recall the cost? Those look great. Thanks, Tim I got some good quality reproduction buckles and hardware from John Torr in the UK (j.torr@tesco.net). Never seen good ones come up on ebay. The chrome trim comes up pretty regularly on ebay but you usually have to buy a crappy seat with i...

Yes, you must use the type 1 or 180 deg rotor. Just make sure the TDC mark lines up with stator when piston is at top. And check the total timing with a strobe timing light. Tim I am working on a Dream for fellow member Jerrybb. It has a 180 crank installed, but a C72 rotor with only one set of timi...

Just cut that section out and weld on a new one. It's just 1.5" OD 16 gage steel tubing or better yet use stainless. If you need help PM me. Tim Recently I bought a pair of Scrambler pipes on E-bay. Upon examining them, I noticed that there appeared to be baffles crammed fairly deep into the rear of...

The angle issue is really no big deal. Just protect the chrome well ( hard plactic ) or soft jaws in the good ole vise....twist alittle then test fit....the chrome won't pop I've done 50+ with no problem. Other wise the Honda quality is excellent. Tim The good news is that a 8mmx1.25 helicoil treads...