Honda305.com Forum

As I continue my trail and error on these pinned front fork Pistons it appears they are not interchangeable. From what I can tell the fork piston was assembled to the fork tube then the holes were drilled and pinned with subtle differences in the spacing from fork tube to fork tube. In fact you have...

G-Man

Sent PM (I think - new to the whole PM thing). Let me know if you don't get one.

Husker

Thanks G-man. Would happily reimburse you for their value and shipping. Enjoy your week.

Husker

After disassembly and inspection on the fork pistons they are below minimum spec for outer diameter plus had what I would best describe as flats wore on one of them. Based on my review of the parts diagram these pistons should have a part number of 51442-268-040. When I called Nick at Ohio Cycle the...

G-man thanks for the photo, worth a thousand words as they say. I'm wondering how my fork ended up with no circle clip holding the damper valve in place. I had one circle clip in the upper groove and the second circle clip above that one free to slide on the fork tube. This allowed the damper valve ...

After finishing my chores I went back to work on the fork. I got the knock pins out and disassembled it. However I am confused. On the pipe fork there are two grooves for snap rings. On my fork there was no snap ring in the lower groove, one snap ring in the upper groove, and a snap ring just floati...

Thanks Loud Mouse and G-man. Another example of why I like this forum so much.

Husker