Home Auctions Gallery Forum

honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Missing Carb Part :(

Fuel System: Gas (Petrol) tanks, Carburators
Post Reply
obscure44
honda305.com Member
Posts: 25
Joined: Tue Jul 29, 2008 2:17 pm
Location: Omaha, NE

Missing Carb Part :(

Post by obscure44 » Sun Aug 17, 2008 11:03 am

So in the process of going to Autozone and returning, I lost the fuel inlet/nipple (see picture below). Does anyone have one I could beg/borrow/buy?

Thanks!!
David
Attachments
fuel_inlet.jpg
Top
obscure44
honda305.com Member
Posts: 25
Joined: Tue Jul 29, 2008 2:17 pm
Location: Omaha, NE

Post by obscure44 » Wed Aug 20, 2008 1:53 pm

After not being able to track down an original fuel fitting, I think I'm going to experiment with Holley replacement parts. A generic inline fuel filter/fitting from Autozone fits the threading, so I'm hoping it's a fairly common thread size, rather that some odd metric count. Still would appreciate an original fitting if anyone has a "parts" carb sitting around...
Top
obscure44
honda305.com Member
Posts: 25
Joined: Tue Jul 29, 2008 2:17 pm
Location: Omaha, NE

Post by obscure44 » Wed Aug 27, 2008 1:17 pm

By the way, for the sake of creating a knowledge dump, the thread size on the PW22 fuel fitting is 1/8" NPT.
Top
Post Reply

Return to “Carburation - Fuel”