Carb slide 1966 CL77

seagrays · Post by **seagrays** » Sat Nov 06, 2010 11:25 pm

Hi, new to forum and ownership of a '66 and '67 Scrambler. Checking to see if anyone has experienced a problem with a sticking carb slide. Parked bike for two weeks with bike running well and go to start this morning and left slide is hanging up. Cannot seem to figure out how or why. No obvious problem. Rt. side working fine. Any suggestions are welcome. Thanks.

Dgormley · Post by **Dgormley** » Sun Nov 07, 2010 1:50 am

Seagray, It's more than likely one of 5 things: 1 gummed up. 2 Carb bolts are too tight. 3 Cable is fouled somewhere. 4 Idle screw misadjusted. 5 Intake leak. Bike had probably been sitting for awhile, time to go through them anyway. Also, use the tune-up method in the FAQ section on the left side of this page. Oh yeah, welcome to the asylum....................................D. BTW, Where ya from?

seagrays · Post by **seagrays** » Sun Nov 07, 2010 9:04 am

Thanks for the response and suggestions. I'll go through it and let you know what I find. I'm in San Rafael...Marin County, just north of SF. Thanks again.

davomoto · Post by **davomoto** » Sun Nov 07, 2010 9:47 am

Seagrays, I'm in San Anselmo, right next door. PM me if you need assistence.

Davo

Dgormley · Post by **Dgormley** » Sun Nov 07, 2010 10:33 am

This is a perfect example of why "Ed" cheerfully requests your location!..............D:)

seagrays · Post by **seagrays** » Sun Nov 07, 2010 12:57 pm

Thank you...got slide working and now kick starter is not returning...oh well, I'm learning.

davomoto · Post by **davomoto** » Fri Nov 12, 2010 3:23 pm

Yes, Chris came by yesterday, and picked up a part. It was great meeting another 305 guy that lives so close! Exchanged some great stories, and we will surely stay in contact!

Davo

Honda305.com Forum

honda305.com Forum

Carb slide 1966 CL77

Carb slide 1966 CL77

Carb slide

Where ya from