honda305.com Forum
Vintage Honda Owners, Restorers, Riders and Admirers
Carb inlets out of round!
-
Dana01
- honda305.com Member
- Posts: 371
- Joined: Mon Nov 22, 2010 2:09 pm
- Location: Folsom (prison), CA: (peeling potatoes)
- Contact:
Carb inlets out of round!
Ok ... this is totally bizarre. I just measured the Keihin carbs on my 66 CB-77. When measured horizontally, they mic out at 26mm, when measured vertically, they're 27mm. Both carbs are identical. No wonder I was getting baffled measuring for the O-ring. (The outlets are both off by .5mm)
Dana
1966/7 CB-77 Red of course
1976 CB-550F (project over-budget and under-funded)
1985 GS-450S (Land Speed Racer)
1966/7 CB-77 Red of course
1976 CB-550F (project over-budget and under-funded)
1985 GS-450S (Land Speed Racer)