honda305 Home honda305 Auctions honda305 Gallery honda305 Forum Electronic Ignition honda305 Forum honda305 Forum honda305 Forum honda305 Racing honda305 Literature

Auctions  Mailing List    Registry   Marketplace Forum - FULL SCREEN Forum

□ Search
□ FAQ 
  □ MY_ADS
Vintage Honda Owners,
Restorers, Riders and

CL77 Type II fork rebuild

Post Reply
GregMcN Member
Posts: 231
Joined: Tue Jul 04, 2017 3:34 pm
Location: Richmond, North Yorkshire, UK

CL77 Type II fork rebuild

Post by GregMcN » Wed Jun 17, 2020 2:52 pm

A couple of questions related to the rebuild.
Obviously I will replace the seals but just wondered about any other components.
The damper valve appears to be available from David Silvers but they do not seen obviously worn so would be interested in views on whether they should be replaced.


There is also an o-ring just below the flanged piece. I am not sure what it does so difficult to understand how important to replace. CMS list as 38 x 1.7mm but do not stock, the closest I can find is 37.8 x 1.78mm which I am assuming would be OK?


Any thoughts appreciated.

Post Reply



CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home