honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

Shift Fork assembly

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
lhz55
honda305.com Member
Posts: 29
Joined: Thu May 22, 2008 9:58 am
Location: Myrtle Beach, SC

Shift Fork assembly

Post by lhz55 » Fri Jul 18, 2008 9:39 pm

Upon reassembly, The shift fork end does not stick out enough through the side cover for the foot pedal linkage to fully slide back on.
Is there something I can do to adjust this?
Thanks, Lee
Top
User avatar
davomoto
honda305.com Member
Posts: 2508
Joined: Sat Nov 18, 2006 7:36 pm
Location: Marin County CA

Post by davomoto » Sat Jul 19, 2008 11:53 am

Lee, how far is it off? There is no adjusment, it sits flush in the center case. Is the seal flush with the clutch cover? Is the clutch cover seated against center case? They do slide in and out a bit, but I've never run in to this problem.

davomoto
Top
jwbert
honda305.com Member
Posts: 89
Joined: Wed Jan 05, 2005 5:47 pm
Location: McFarland, WI

Post by jwbert » Mon Jul 21, 2008 7:01 pm

Is the seal in the side case fully seated? It should be flush with the metal of the sidecover. JWB
Top
lhz55
honda305.com Member
Posts: 29
Joined: Thu May 22, 2008 9:58 am
Location: Myrtle Beach, SC

Post by lhz55 » Tue Jul 22, 2008 8:21 am

The seal looks flush. I will pull the cover and re-examine the fork. I thought since I've had it apart for a while I may have missed a washer or something.
Thanks, Lee
Top
Post Reply

Return to “Transmission”