honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

12x2.2 Clutch Rod O-ring

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
nrpolo
honda305.com Member
Posts: 17
Joined: Thu May 03, 2012 9:00 pm
Location: Belen, NM

12x2.2 Clutch Rod O-ring

Post by nrpolo » Fri Jul 26, 2013 9:01 pm

Put my cl77 engine together and can't find or understand the purpose of the o-ring that the clutch rod goes through. Does not seem to be in my gasket kit. What keeps it in place and where can I find one. Is there a substitute and what will happen if I omit it. Thanks
Top
48lesco
honda305.com Member
Posts: 721
Joined: Tue Mar 06, 2007 1:45 pm
Location: Olmsted Twp, Ohio

Post by 48lesco » Sat Jul 27, 2013 6:44 pm

It keeps oil from seeping through the main shaft into your clutch actuator on the right side. It goes in a groove in the main shaft. It's available from Honda.
-48
Top
nrpolo
honda305.com Member
Posts: 17
Joined: Thu May 03, 2012 9:00 pm
Location: Belen, NM

Post by nrpolo » Mon Jul 29, 2013 8:27 am

Thank you Sir. I will drive to town to get one.
Top
nrpolo
honda305.com Member
Posts: 17
Joined: Thu May 03, 2012 9:00 pm
Location: Belen, NM

Post by nrpolo » Mon Jul 29, 2013 8:28 am

Thank you Sir. I will drive to town to get one.
Top
48lesco
honda305.com Member
Posts: 721
Joined: Tue Mar 06, 2007 1:45 pm
Location: Olmsted Twp, Ohio

Post by 48lesco » Mon Jul 29, 2013 8:21 pm

If that o-ring is all you need, I have an extra one I can just mail you. Your dealer will probably have to order it anyway. PM me your address if you want it.
-48
Top
Post Reply

Return to “Transmission”