CB72/77 Gearbox mainshaft bearing

malcolmgb · Post by **malcolmgb** » Wed Mar 26, 2014 1:33 pm

Do you still have the 6305 bearing you took out? I have just checked my bearing which is 17mm and judging by the condition of it and the remainder of the engine it is original fitment. The 6206 at the other end of the shaft is 16mm which is correct.

Tinman · Post by **Tinman** » Wed Mar 26, 2014 4:45 pm

malcolmgb wrote:Do you still have the 6305 bearing you took out? I have just checked my bearing which is 17mm and judging by the condition of it and the remainder of the engine it is original fitment. The 6206 at the other end of the shaft is 16mm which is correct.

If this helps, the 6305 I pulled out is 17mm and the 6206 is 16mm which are original as the cases haven't been split before. Replaced with same dimensioned bearings.

malcolmgb · Post by **malcolmgb** » Wed Mar 26, 2014 5:17 pm

Thanks Tinman that confirms my findings.

Tinman · Post by **Tinman** » Wed Mar 26, 2014 7:18 pm

malcolmgb wrote:Thanks Tinman that confirms my findings.

Yes Sir.