honda305 Home honda305 Auctions honda305 Gallery honda305 Forum

honda305.com Forum

□ Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Kickstart spindle pawl

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
Husker45
honda305.com Member
Posts: 58
Joined: Sun Nov 06, 2011 10:10 am
Location: Pittsburgh, PA

Kickstart spindle pawl

Post by Husker45 » Sun Jul 08, 2012 5:39 pm

Reassembling my cb77 motor. When I have installed the kick start stopper bolt should the kick start spindle pawl be completely disengaged from low gear. When I spin it by hand I can still hear the pawl clicking. Thanks in advance for any advice.

Husker45
Top
LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: Kickstart spindle pawl

Post by LOUD MOUSE » Sun Jul 08, 2012 6:03 pm

That is normal.
Turn the shaft clockwise to stop when you install the cover. ..........lm
Husker45 wrote:Reassembling my cb77 motor. When I have installed the kick start stopper bolt should the kick start spindle pawl be completely disengaged from low gear. When I spin it by hand I can still hear the pawl clicking. Thanks in advance for any advice.

Husker45
Top
Husker45
honda305.com Member
Posts: 58
Joined: Sun Nov 06, 2011 10:10 am
Location: Pittsburgh, PA

Post by Husker45 » Sun Jul 08, 2012 7:55 pm

Thanks lm.
Top
Post Reply

Return to “Transmission”

 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home