honda305.com Forum
Vintage Honda Owners, Restorers, Riders and Admirers
Spoke locations
Spoke locations
I stripped the spokes from 6 rims in prep for replating. I didn't notice (look for!) any differance between the spokes. After bead blasting and sorting out I found that half of my A & B spokes have a larger diameter at the top, see attached photo. I assume the ones with the increased diameter are for the rear wheels and the constant diameter ones for the front. Need verification please.
- Attachments
-
- Diameter change in circle on left
- spokes.jpg (1.89 KiB) Viewed 2474 times
-
LOUD MOUSE
- honda305.com Member
- Posts: 7817
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Re: Spoke locations
Yep.
Usually so. ...........lm
\uote="djohns"]I stripped the spokes from 6 rims in prep for replating. I didn't notice (look for!) any differance between the spokes. After bead blasting and sorting out I found that half of my A & B spokes have a larger diameter at the top, see attached photo. I assume the ones with the increased diameter are for the rear wheels and the constant diameter ones for the front. Need verification please.[/quote]
Usually so. ...........lm
\uote="djohns"]I stripped the spokes from 6 rims in prep for replating. I didn't notice (look for!) any differance between the spokes. After bead blasting and sorting out I found that half of my A & B spokes have a larger diameter at the top, see attached photo. I assume the ones with the increased diameter are for the rear wheels and the constant diameter ones for the front. Need verification please.[/quote]