Bad rims warning

LOUD MOUSE · Post by **LOUD MOUSE** » Mon Sep 19, 2011 10:21 am

We do need to check sellers feedback and not just the complaint but the REPLIES.
They will give a good idea of the attitude of the seller. .........lm

dohcmike wrote:Seller is called ooo-yez

G-Man · Post by **G-Man** » Mon Sep 19, 2011 10:24 am

Mike

Follow their ordering procedure and they will drill the rim to the correct dimensions and supply spokes to fit.

They did the rims for my Yamaha Flat Tracker which was entirely custom. I just chose the rims, and measured the hubs. They supplied the rims and spokes and I built the wheels myself.

Classic Mechanics Flat Tracker by graham.curtis, on Flickr

Good luck

G

dohcmike · Post by **dohcmike** » Mon Sep 19, 2011 10:38 am

LOUD MOUSE wrote:We do need to check sellers feedback and not just the complaint but the REPLIES.
They will give a good idea of the attitude of the seller. .........lm

dohcmike wrote:Seller is called ooo-yez

today i had check with honda dealer they said c77 hub bigger and curve spokes head need more curve to fit not ordinary spokes your local bike shop say it's true but original spokes head was bend more curve i will check with www.cmsnl.com but i can garunteed rim universal standard if you not believe me pls check again

Send him this answer from Bill Silver:
xpert: Bill Silver
Subject: ill fitting spokesheads Dream 305 C77 (eu)
Question: I bought a 16 inch Union Cycles rim together with a new spokes-set but now found out ( at least the guy who spokes in the wheel)that the spokesheads don,t fit right in the hole.
So good lacing is impossible, the threads stick out and there.s a lot of tension and bending going on.
How do we solve this?
Maybe you got a picture of how the spokeshead should look like?
I didn,t keep my old spokes so I can,t compare.
Also the exact length and angle of the spokes could be handy...
Hope you can help me out....
Kind regards, Mike Jagt
Answer: Mike, those wheel/spoke kits are a disaster and they won't make them right, apparently. If the rims are 1.85x16, they are really for a C95 Benly, not a Dream. The spoke holes are drilled incorrectly for Dream hub widths. I don't have any close-up photos of Dream wheels/spokes at the moment, or spoke length dimensions.

I would contact Central Wheel in the UK and see if they can re-drill your rims, if they are the correct width. If they are not the correct rims, then you are fighting a losing battle.

Bill Silver

Send him this , but he just doesn,t listen
send him pictures of wheel....

dohcmike · Post by **dohcmike** » Mon Sep 19, 2011 10:42 am

Beste mikej-nl,

185 x 16 ok

now i have takasago genuine just add 20 usd ok

- ooo-yez

Van: mikej-nl
Aan: ooo-yez
Onderwerp: mikej-nl has sent a question about item #270419911269, ending on Oct-25-10 19:25:05 PDT - 1 METAL RIM HONDA TOURING C70 C71 C72 CA72 C77 CA77 C78
Verzenddatum: Oct-05-10 11:06:15 PDT

Dear ooo-yez,

Are you absolute sure this is the correct size rim for a Honda Dream C77 1962 front wheel ?

- mikej-nl

LOUD MOUSE wrote:We do need to check sellers feedback and not just the complaint but the REPLIES.
They will give a good idea of the attitude of the seller. .........lm

dohcmike wrote:Seller is called ooo-yez

Asked this before i bought in confidence

dohcmike · Post by **dohcmike** » Mon Sep 19, 2011 10:51 am

It,s his fault all along, ad states clearly C77.
This is the result, can it be clearer?

dohcmike · Post by **dohcmike** » Mon Sep 19, 2011 10:59 am

dohcmike wrote:It,s his fault all along, ad states clearly C77.
This is the result, can it be clearer?

Even send him more pictures than this one.
Did not keep all the mails, the more i write the more frustrated i get and my mailbox to full.
This is the last thing i,ll ever buy from this guy, what a mentality.
Thinks i, m doing this out of fun.
When i would keep it like this, it would be unsafe to ride and impossible to sell.
But that,s not his problem clearly

dohcmike · Post by **dohcmike** » Mon Sep 19, 2011 11:07 am

dohcmike wrote:
dohcmike wrote:It,s his fault all along, ad states clearly C77.
This is the result, can it be clearer?
Even send him more pictures than this one.
Did not keep all the mails, the more i write the more frustrated i get and my mailbox to full.
This is the last thing i,ll ever buy from this guy, what a mentality.
Thinks i, m doing this out of fun.
When i would keep it like this, it would be unsafe to ride and impossible to sell.
But that,s not his problem clearly

Did offer to return the item but that cost me 41 dollars again to get 30 back.....
You don,t have to be Dutch to know that,s stupid ;8+

Honda305.com Forum

honda305.com Forum

Bad rims warning