G-Man ,,,you ground off the old butchered sections, then built up some new welded on "meat" ...and then took it down (milled? turned?) to original spec... That is some serious craftsmanship !!!
...and you documented all the steps and posted the photos! Incredible...!
Respect and Lots of props !!! :)
--
Michael Stoic
honda305.com Forum
Vintage Honda Owners, Restorers, Riders and Admirers
Wheel hub collar
-
Michael Stoic
- honda305.com Member
- Posts: 315
- Joined: Fri Mar 07, 2003 1:35 am
- Location: Boston | USA
- Contact:
Re: Wheel hub collar
Michael
Thank you for the kind comments.
I enjoy recording the things I do. It helps me and it may help others.
Today's effort was rebuilding this crankshaft...
G
Thank you for the kind comments.
I enjoy recording the things I do. It helps me and it may help others.
Today's effort was rebuilding this crankshaft...
G
Michael Stoic wrote: ↑Sat Jan 04, 2020 3:40 pmG-Man ,,,you ground off the old butchered sections, then built up some new welded on "meat" ...and then took it down (milled? turned?) to original spec... That is some serious craftsmanship !!!
...and you documented all the steps and posted the photos! Incredible...!
Respect and Lots of props !!! :)
--
Michael Stoic
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
-
Michael Stoic
- honda305.com Member
- Posts: 315
- Joined: Fri Mar 07, 2003 1:35 am
- Location: Boston | USA
- Contact:
Re: Wheel hub collar
GMan... I wish there were no pond between the US and the UK. I would be over your shop to hold the lamp and sweep the floor, just to see you do this!
--
Michael
--
Michael
Re: Wheel hub collar
Michael
You're welcome any time!
G
You're welcome any time!
G
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F