honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Clutch side cover bolt?

Post Reply
zads
honda305.com Member
Posts: 37
Joined: Mon May 12, 2014 11:24 pm
Location: Winnipeg, Manitoba, Canada

Clutch side cover bolt?

Post by zads » Tue Jun 25, 2019 3:47 pm

Hello,

I am putting my clutch side cover on after rebuilding the transmission and top end and there is one bolt that I cannot figure out. It holds a metal plate below the starter chain, but it is also the same hole the clutch cover uses. Did I put the metal piece in the wrong spot? Is there a special bolt that goes here?

I can't seem to upload a photo, I keep getting a message that says 'Tried to upload empty file'

Here is a link to the bolt and location that I am talking about.

https://photos.app.goo.gl/4Y2G5NgsQsTBGLGw9

Thanks in advance

DJM
honda305.com Member
Posts: 553
Joined: Thu Oct 09, 2003 1:54 pm
Location: Chesterfield UK

Bolt

Post by DJM » Tue Jun 25, 2019 5:22 pm

The metal plate you have should be fixed into a hole about 25mm behind the on you've currently got it in.

You won't see it because it's underneath the alternator assembly.

Send me your E-mail address and I'll send you a couple of pictures of how it should be.

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home