CB77 Sidestand Mounting Question

[akpasta]

Just picked up a original sidestand from someone on CL. Looks good. The mounting bracket is a bit bent, hopefully not bad. No cracks. It appears complete.

My question is. I see four holes in the mounting bracket. Do I need to buy any additional bolts or will all the bolts that are already on the bike suffice? I'd prefer to have everything I need to install it before I take it apart so I don't have to take things apart twice. (I work outside on the street it's a pain).

Thanks!

[davomoto]

Andy,

You will need the special bolt that goes through the sidestand bracket, and the center stand. I can't remember the part #, but the last 3 digits are 810, meaning Honda accesory part. Nick at ohio cycles may have them. That's the one I loaned you that fell out.

Davo

[akpasta]

Hi Davo,

So it needs a different bolt than the one that already goes through the center stand and frame? Does it need a longer one, or something?

[davomoto]

Yes, it's longer, as it goes through the side, and centerstands.

[akpasta]

Arrg. There's always something else you need to get, isn't there. The hunt continues. Thanks.